Yale Assure Lock 2 Touch Key-Free Setup Guide

Quick Answer

Setting up your Yale Assure Lock 2 Touch key-free lock takes about 30 minutes. You'll install the hardware, connect via Bluetooth in the Yale Home app, and configure your entry codes.

Step-by-Step Setup Process

1. Remove the old lock and prepare the door: Unscrew and remove your existing deadbolt and interior/exterior trim. Make sure the door edge is clean and the bolt hole is clear. Insert the new deadbolt into the edge hole and secure it with the two screws provided. Slide the mounting plate over the deadbolt and fasten it with the four included screws. Check that the deadbolt moves freely before attaching the lock body. If it sticks, adjust the alignment.
2. Attach the exterior keypad and interior assembly: Feed the cable from the exterior touchscreen through the center hole of the mounting plate. Align the exterior piece against the door and hold it in place. Connect the cable to the interior lock body, then attach the interior assembly to the mounting plate using the two long screws. Tighten until snug—do not overtighten. Make sure the cable isn't pinched between the lock and the door. A pinched cable can cause intermittent power issues.
3. Install the batteries and power on: Insert four AA batteries into the interior battery compartment. The lock will beep and the touchscreen will light up briefly. Wait for the lock to initialize—this takes about 10 seconds. Do not close the battery cover yet. If the lock doesn't beep or light up, check battery polarity and connection. Try a different set of batteries if needed.
4. Download and open the Yale Home app: Download the Yale Home app from the App Store or Google Play. Create an account or log in. Tap 'Add Device' and select 'Yale Assure Lock 2 Touch' from the list. Follow the on-screen prompts to enable Bluetooth and location permissions. Keep your smartphone within 10 feet of the lock during pairing. A weak Bluetooth signal will cause pairing failures.
5. Pair the lock via Bluetooth: In the app, press the 'Pair' button on the lock's interior (a small button near the battery compartment). The lock will beep and the app will search for it. When the lock appears, tap it to confirm. The app will ask you to name the lock and set a master PIN code (4-8 digits). Enter and confirm the code. Write down the master PIN code. If you forget it, you'll need to factory reset the lock to regain access.
6. Configure Auto-Lock and DoorSense: In the app settings, enable Auto-Lock and set the delay (30 seconds to 4 minutes). Then calibrate DoorSense by closing the door and following the app's calibration steps. This ensures the lock knows when the door is closed and can auto-lock reliably. DoorSense calibration is critical for Auto-Lock to work. If the door doesn't close fully, recalibrate or adjust the strike plate.
7. Test the lock and create user codes: Lock and unlock the door using the touchscreen (enter your master code) and the app. Then go to 'Manage Codes' in the app to add temporary or permanent codes for family or guests. Test each code to confirm it works. Test all entry methods before closing the door fully. If the lock jams, check the deadbolt alignment and strike plate position.

Product Features at a Glance

• Yale Assure Lock 2 Touch with Bluetooth - Key Free: You've got enough on your plate, let Yale get the door. With multiple ways to unlock, the ability to share and track entry codes, and Auto-Lock with DoorSense®, the Yale Assure Lock 2 makes securing and accessing your home, one less thing to worry about. The Auto-Lock with DoorSense feature automatically locks the door when it closes, so you never have to worry about forgetting to lock up.