Install a Drive-In Latch on Yale Assure Lock 2

By Yale Locks | Official Online Store | Yale Home | Published: 2026-10-26

Category: How-to Guides

Learn how to replace or install a drive-in latch on your Yale Assure Lock 2 deadbolt. Follow these steps for a secure, smooth installation.

Quick answer

Installing a drive-in latch on your Yale Assure Lock 2 is straightforward if you prepare the door edge and align the latch correctly. This guide walks you through each step to avoid misalignment and ensure a secure fit.

Why use a drive-in latch?

A drive-in latch is a replacement option for the standard rectangular latch plate that comes with most deadbolts. It fits into a round hole drilled into the door edge, making it a cleaner look and often easier to install on metal doors or doors with pre-existing round holes. The trade-off is that it requires precise alignment to avoid binding, and it's less adjustable than a full latch plate.

Installation steps

Step 1: Remove the existing latch: Unscrew and remove the current latch assembly from the door edge. If you have a standard latch plate, remove it completely. Keep the screws from the old latch; they may be needed for the new drive-in latch.
Step 2: Insert the drive-in latch into the door edge: Align the drive-in latch with the round hole on the door edge. Push it in until it is flush with the door surface. The latch bolt should face the strike plate side of the door. Make sure the latch is oriented correctly—the beveled side of the bolt should face the door frame.
Step 3: Secure the latch with screws: Use the provided screws (or the ones from your old latch) to fasten the drive-in latch to the door edge. Tighten them firmly but avoid overtightening, which can strip the threads. Check that the latch bolt moves freely after tightening. If it sticks, loosen the screws slightly and realign.
Step 4: Reinstall the deadbolt assembly: Place the Yale Assure Lock 2 deadbolt back onto the door, ensuring the bolt engages with the drive-in latch. Secure the deadbolt with its mounting screws. Test the lock by turning the thumb turn or key—the bolt should extend and retract smoothly without binding.
Step 5: Test the alignment: Close the door and check that the bolt aligns with the strike plate on the door frame. If misaligned, adjust the drive-in latch slightly by loosening and repositioning it. A misaligned latch can cause the lock to stick or not engage properly, so take time to get it right.

Product needed

Drive-In Latch for Yale Assure Lock 2: Drive-In latch for Yale Home Deadbolt installation. This adjustable deadbolt is only compatible with YRD410/420/430/450. This latch is specifically designed for Yale Assure Lock 2 models, ensuring correct fit and reliable operation.
Drive-In Latch for Yale Assure Lock 2