Back to Blog
How-to Guides 2026-11-20 Yale Locks | Official Online Store | Yale Home 0 views

How to Rekey a Yale Flat Square Single Cylinder Deadbolt

How to Rekey a Yale Flat Square Single Cylinder Deadbolt

Learn the steps to rekey your Yale Flat Square Single Cylinder Deadbolt using a rekey kit, plus important considerations before you start.

What This Guide Covers

This article explains how to rekey a Yale Flat Square Single Cylinder Mechanical Deadbolt. Rekeying lets you change the lock's key without replacing the entire lock, which is useful if you move into a new home, lose a key, or want all locks to use one key.

The instructions here are based on general deadbolt rekeying principles and the specific catalog information available for this model. You will need a rekey kit that matches the Yale 6-pin cylinder used in this deadbolt.

What the Catalog Confirms About This Deadbolt

  • Flat Square Single Cylinder Mechanical Deadbolt: The Yale Flat Square Single Cylinder Mechanical Deadbolt is part of the New Traditions Collection, constructed to meet Grade 3 standards. Grade 3 indicates a residential-grade lock, suitable for standard home use. The rekey process is the same as for other Yale deadbolts with a 6-pin cylinder.
    Flat Square Single Cylinder Mechanical Deadbolt
    Flat Square Single Cylinder Mechanical Deadbolt
  • Flat Square Single Cylinder Mechanical Deadbolt: Available finishes include Oil Rubbed Bronze, Satin Nickel, Black Suede, and Polished Chrome. The finish does not affect the rekey process. You can rekey any finish variant the same way.

Steps to Rekey the Yale Flat Square Deadbolt

Before starting, ensure you have the correct rekey kit (typically a Yale 6-pin rekey kit) and the original key that currently operates the lock. If you don't have the original key, you may need a locksmith to remove the cylinder.

  1. Remove the deadbolt from the door: Unscrew the two screws on the interior mounting plate (behind the thumb turn). Pull the interior assembly away, then remove the two screws on the exterior assembly. Slide the latch and deadbolt body out of the door.
  2. Remove the cylinder from the exterior assembly: Locate the small set screw on the side of the exterior housing (near the keyhole). Loosen it with a small hex key or screwdriver. Slide the cylinder out from the front of the housing.
  3. Remove the clip and cylinder plug: On the back of the cylinder, you'll see a C-clip or retaining ring. Use a small flathead screwdriver or pliers to carefully remove it. Slide the cylinder plug (the part with the keyway) out from the cylinder body.
  4. Replace the pins using the rekey kit: Remove the old pins from the plug (there are 6 pin chambers). Insert the new pins from your rekey kit according to the new key's bitting. The kit includes driver pins and springs for the cylinder body.
  5. Reassemble and test: Slide the plug back into the cylinder body, reinstall the C-clip, and place the cylinder back into the exterior housing. Tighten the set screw. Test the new key in the cylinder before reinstalling the deadbolt on the door.

Important Considerations Before You Start

The catalog does not confirm whether the Flat Square Single Cylinder Deadbolt uses a standard 6-pin cylinder (common for Yale mechanical deadbolts) or a different configuration. If your lock's cylinder does not match the standard size, a standard rekey kit may not work. In that case, consult a professional locksmith.

Also, the catalog does not provide specific torque or alignment specifications for reassembly. Use moderate hand-tight force on screws to avoid stripping. If the lock feels rough after rekeying, the pins may not be seated correctly—disassemble and check each pin chamber.

When to Call a Professional

If you lose the original key, the cylinder may need to be drilled out, which is best left to a locksmith. Similarly, if the deadbolt is part of a multi-lock system (e.g., all locks keyed alike), rekeying one lock may require matching the others—a locksmith can rekey all cylinders to a single new key.

The Yale Flat Square Single Cylinder Deadbolt is a solid residential lock, and rekeying it yourself is a manageable DIY project with the right tools. Just be sure to check the cylinder type before purchasing a rekey kit.

Related Articles

Customer Service
Home
Products
Cart
Profile